14
14.3
Interrupt Copying
Use the Interrupt mode to interrupt copying in progress to perform a simple
job. When interrupt copying is completed, the settings for the previous job
restore automatically and the Basic Screen displays.
To use Interrupt mode
0 The Interrupt mode cannot be selected with the following conditions:
Machine is not operating printing or scanning job.
Program Image Overlay is in use.
The Call for Service message displays or a paper misfeed occurs.
Already using Interrupt mode.
0 Reserve job cannot be operated in Interrupt mode.
0 Low Power or Sleep will not function during Interrupt mode.
1
Press [Interrupt] on the control panel.
The Interrupt LED starts flashing, then keeps lighted when machine is
ready for Interrupt mode.
The Basic Screen for Interrupt copying will be displayed.
14-8
Advanced Information
bizhub PRO 920