Interrupt Copying - Konica Minolta bizhub pro 1050 User Manual

Interrupt Copying

Use the Interrupt mode to interrupt copying in progress to perform a simple job.
When interrupt copying is completed, the settings for the previous job restore
automatically and the Copy Screen displays.
Specification for Interrupt Mode
❒ The Interrupt mode cannot be selected with the following copier conditions:
Machine is not operating printing or scanning job.
Overlay Memory is in use.
The Call for Service message displays or a paper misfeed occurs.
Already using Interrupt mode.
❒ Reserve job cannot be operated in Interrupt mode.
❒ Auto Low Power or Auto Shut-off will not function during Interrupt mode.
1.
Press [Interrupt] on the control panel.
The [Interrupt] LED starts flashing, then keeps lighted when machine is
ready for Interrupt mode.
The Copy Screen for Interrupt copying will be displayed.
2.
Set copy conditions, as desired.
All copy conditions except Reserve mode can be specified.
3.
Position original(s), then press [Start] to start the interrupt
copying.
13-7