To Specify The Binding Width ("Margin Setting" Function) - Konica Minolta Di1611 Advanced Information

7

To specify the binding width ("MARGIN SETTING" function)

1
Select the "COPY SETTING 1"
menu.
Refer to "To select the "COPY
SETTING 1" menu" on
page 7-36.
2
Press the [6] key from the 10-Key
Pad to select "MARGIN SETTING".
3
Using the 10-Key Pad, enter the
binding width (margin), and then
press the [Yes] key.
The binding width can be set
between 0 mm and 20 mm.
If you wish to correct the setting,
press the [No] key, and then enter the new number.
The "COPY SETTING 1" menu appears again.
7-42
Utility Mode – Copy Functions
Di1611/Di2011