Tcp/Ip (Administrator Mode) - Konica Minolta BIZHUB 350 User Manual

9
9.14

TCP/IP (Administrator mode)

Specify the required settings for using this machine over a network.
If "TCP/IP" is clicked, settings can be specified for the following.
Item
TCP/IP [*]
DHCP Configu-
ration [*]
IP Address [*]
Subnet Mask [*]
Gateway Ad-
dress [*]
RAW Port [*]
RAW Port
Number
Self-Domain
Name [*]
Port Number[*]
DNS Configu-
ration
Host Name
Domain Name
DNS Server Ad-
dress 1 to 3
DNS Query
Timeout
SLP [*]
9-64
Specifying settings using PageScope Web Connection
Description
Select whether to enable or disable TCP/IP.
Select whether the DHCP server is enabled (the IP address is acquired auto-
matically) or disabled (a fixed IP address is specified).
Specify the IP address of this machine. Specify a setting when "DHCP Con-
figuration" is set to "Disable".
Type in the subnet mask of the network to be connected. Specify a setting
when "DHCP Configuration" is set to "Disable".
Type in the default gateway of the network to be connected. Specify a setting
when "DHCP Configuration" is set to "Disable".
Select whether or not a port number is used with RAW printing.
Specify the RAW port number. Enter the port number within the range of 1 to
65535.
Specify the domain name of this machine. Specify this setting when perform-
ing a direct fax transmission over a mail server. For details on specifying the
domain device settings, refer to the User manual [Facsimile Operations].
Note
"Self-Domain Name" and "Port Number" appear if the optional
scanner unit or fax kit has been installed.
To send a direct fax, the optional fax kit must be installed.
Type in a port number between 1 and 65535 for this machine's domain.
Select "Yes" or "No" for the DNS (Domain Name System).
When using a DNS server within a network, select "Yes". When not using a
DNS server within a network, select "No".
When using an external server such as an Internet provider, select "No" if the
IP address of the mail server is public. If the DNS name of the mail server is
public and the IP address is not public, select "Yes".
For details on the network environment, contact the network administrator.
Specify the host name of this machine.
For details on the settings to be specified, contact the network administrator.
Specify a setting when "DNS Configuration" is set to "No".
Specify the domain name of the DNS server.
For details on the settings to be specified, contact the network administrator.
Specify a setting when "DNS Configuration" is set to "No".
Specify the IP addresses of the DNS server.
For details on the settings to be specified, contact the network administrator.
Specify a setting when "DNS Configuration" is set to "No".
Select the time when a query to the DNS server is timed out. Select 20, 40,
80, 160, 320, or 640 seconds.
Select whether to enable or disable SLP (Service Location Protocol).
bizhub 350/250 (Phase 2.5)