Chapter 7: Application
2.
In the displayed dialog box, select user name and enter
password.
3.
Click [OK].
Configure is started.
●
TCP/IP Setting
To enable TCP/IP setting is necessary to use the Network Printer function and the Network
Scanner function.
• To reflect the modified settings, reboot the Fiery controller.
1.
Start Configure.
2.
Select [Network] - [Protocol] - [TCP/IP] - [Ethernet].
3.
From [Select IPv4 Address], select [automatically] or [man-
ually].
If [automatically] is
●
selected: Go to Step 4
[Next Page]
About the network setting (Fiery controller)
If [manually] is selected:
●
Go to Step 5
[Next Page]
p. 7-8
7-9