Specifying The Settings; Specifying Settings Concerning The Use Of The Button For Deleting, The Display When A One-Touch Dial Button Is Touched, And The Default Communication Mode (Mode 478); Factory Settings - Konica Minolta bizhub c200 User Manual

Specifying machine functions (software switch settings)
Bits Description
1-0 Specify whether or not a screen asking for confirmation of
the settings is displayed before a broadcast transmission.
2.5.30 Specifying settings concerning the use of the button for deleting, the display when
a one-touch dial button is touched, and the default communication mode (mode
478)
Specify settings concerning the use of the button for deleting, the display when a one-touch dial button is
touched, and the default communication mode.

Factory settings

Bits
Setting (North American model)
Setting (European model)

Specifying the settings

During the production of this unit, the settings in the shaded cells were selected.
Bits Description
7 Specify the operation performed when the button for delet-
ing is touched.
6 Specify whether the recipient information or the name of the
one-touch dial button is displayed when a one-touch dial
button is touched.
5-2 Specify the default communication mode.
−
1-0
C200
7654 3210
1000 0010 (HEX: 82)
0000 0010 (HEX: 02)
Settings Details
00 Does not display the setting
confirmation screen
01 Displays the setting confir-
mation screen before a
broadcast transmission
10 Normally displays the set-
ting confirmation screen, re-
gardless of whether a
broadcast transmission is
being performed
11 *Do not specify these set-
tings.
Settings Details
0 The character above the
cursor is deleted. If there is
no character above the cur-
sor, move the cursor with
the arrow keys, and then de-
lete a character.
1 If there is a character above
the cursor, it is deleted. If
there is no character above
the cursor, the character to
the left of the cursor is delet-
ed.
0 Recipient information (tele-
phone number, e-mail ad-
dress, etc.)
1 Name of the one-touch dial
button
0000 G3-1
0001 G3-2
0010 Internet fax
0011 IP address fax
0100 IP relay
0110 Scan to E-Mail
Others Do not specify any settings
other than those mentioned
above.
10 *Do not change the settings
for these bits.
2
2-40