Specifying The Deleting Method For [Del.] In Input Screens (Mode 478); Specifying Settings For Limiting User Authentication To Only Scan Functions (Mode 479) - Konica Minolta BIZHUB 350 User Manual

9

Specifying the deleting method for [Del.] in input screens (mode 478)

Specify the deleting method for [Del.] in input screens.
Select whether the character at cursor's position or the character to the left
of the cursor is deleted.
Factory settings
Bits
Setting (North
American
model)
Setting (Oth-
er model)
Specifying settings
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
Bit
7
6, 5, 4, 3, 2,
1, 0
Note
North American model default setting: 1
Other model default setting: 0
Specifying settings for limiting user authentication to only Scan func-
tions (mode 479)
Specify whether or not user authentication is performed only when the [Fax/
Scan] or [Extra Scan] key is pressed.
Factory settings
Bits
Setting
9-56
7 6 5 4 3 2 1 0
1 0 0 0 0 0 0 0 (HEX: 80)
0 0 0 0 0 0 0 0 (HEX: 00)
Description Setting
Specify the deleting 0
method for [Del.] in
input screens.
1
----------------------- 0000000
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Specifying management settings
Description
Deletes the character at
the cursor's position
Deletes the character to
the left of the cursor
*Do not change these
bits.
Page refer-
ence
page 12-5
----------
200/250/350