Specifying The Input Tray Or Default Paper Setting, Cr/Lf Substitution Method, And Printing Of Jobs Without Authentication (Mode 452) - Konica Minolta bizhub250 Operation Manual

11
Specifying the input tray or default paper setting, CR/LF substitution
method, and printing of jobs without authentication (mode 452)
Specify whether the input tray is set, or selected according to the default pa-
per setting. In addition, specify the CR/LF substitution method and whether
or not to print jobs without authentication when account track settings have
been applied.
Settings at time of purchase
Bits
Setting
Specifying the setting
The grayed out cells are the settings at the time of purchase. The reference
pages for each function are shown in the far right column.
Bits
7
6
5, 4
3, 2, 1
0
11-36
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description Setting
--------------------- 0
Specifies whether the 0
input tray is set, or se-
lected according to
1
the default paper set-
ting.
Specifies the CR/LF 00
substitution method.
01
10
11
--------------------- 000
Specifies whether or 0
not to prohibit a print
1
job without authenti-
cation.
Various settings
Description
*Do not change this bit.
Tray with default paper is
selected.
Input tray is set.
CR=CR, LF=LF, FF=FF
CRÆCRLF, LF=LF, FF=FF
CR=CR, LFÆCRLF,
FFÆCRFF
CRÆCRLF, LFÆCRLF,
FFÆCRLF
*Do not change these bits.
Prohibited
Not prohibited
Refer to
----------
----------
p. 11-21
----------
p. 11-95
200/250/350