Settings In The Admin. (Administrator Management); Document Management - Konica Minolta bizhub C200 Service Manual

6. Utility Mode
6.5

Settings in the Admin. (Administrator Management)

• The Admin. setting will be available by entering the administrator password (8 digits) set
by the Admin. setting or Service Mode.
(The administrator password is initially set to "12345678.")
6.5.1

Document Management

A. TX Forwarding
Functions • To set to forward received text to a destination that has been set by the administrator.
Use • When forwarding received text to a destination that has been set by the administrator.
1. Touch [Document Management].
2. Touch [TX Forwarding].
Setting/
3. Select the forwarding communication mode, and touch [Next].
Procedure
4. Specify the forwarding destination, and touch [Next].
5. Check the forwarding destination, and touch [OK].
B. RX Document
(1) All Other Docs.
Functions
• Specify the reception method for documents that were received normally.
Use
1. Touch [RX Document].
2. Touch [All Other Docs.].
3. Touch [Password] and register the password.
Setting/
New Password: Enter the new password to be used
Procedure
Confirm New Password: Re-enter the new password
4. Touch [RX Doc. Settings], then select the desired processing type and touch [OK].
* If [Forward] or [Print & Forward] is selected, set the forwarding destination.
(2) Network/G3
Functions
• A different reception method can be specified for each line.
Use
1. Touch [RX Document].
2. Touch [Network], [G3-1] or [G3-2].
3. If [YES] is selected for document management, set how the received document is to
be handled.
Setting/
4. Touch [Password] and register the password.
Procedure
New Password: Enter the new password to be used
Confirm New Password: Re-enter the new password
5. Touch [RX Doc. Settings], then select the desired processing type and touch [OK].
* If [Forward] or [Print & Forward] is selected, set the forwarding destination.
16
Field Service Ver. 1.0 Jun. 2008