Flash - Co Line - Comdial DX-80 Installation And Maintenance Manual

Flash – CO Line
Flash – CO Line is a programmed setting that will determine what flash timing will be presented to the telephone
company central office when the user issues a Hook-Flash command while connected to a CO Line. This feature is a
requirement when the DX-80 is installed "behind" Centrex
code should be programmed onto a Flexible Feature Button for easy access.
If Call Waiting service is provided you can use the Flash feature to answer a second incoming call while connected to
another outside party.
Related Features
Speed Dial (System and Station)
Last Number Redial
Related Programming
Call Handling – CO Flash Time
Operation
While connected to a CO Line, press
Line circuit.
Analog Ports (Single Line Telephones) – Flash
1. While connected on a call, press {FLASH} (hook-switch flash).
#3
2.
Dial .
Analog Ports (Single Line Telephones) – Call Brokering
1. While connected on a call, press {FLASH} (hook-switch flash).
2. Dial the CO Line code, wait for a dial tone, and then dial the second number.
3. To switch back to the first call, press {FLASH} and then dial
4. To disconnect the current call, press {FLASH} and then dial
Conditions
a) The Flash code may be stored in any speed dial location.
b) The Flash code may be stored in the Last Number Redial buffer. When you activate redial, a Digital
Speakerphone display will show a "/" to indicate the Flash code.
c) The Flash time is programmable from 100ms to 1500ms in increments of 100ms (1/10th of a second).
d) At a Digital Speakerphone, when the flash code is dialed "CO Flash" will be displayed temporarily.
e) Single line extensions must generate a hook-flash on the analog port and then dial
hook-flash on a CO Line.
Default Settings
Call Handling – Category 1 – CO Flash Time is set to "0.8 seconds." (Range is: 0.1 – 3.0 seconds.)
Programming via the DET (Digital Extension Terminal)
back back next next
back back next next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show show show show
•
Press [ ]. The DB Item Select screen displays.
P7290 IMM
DX-80 I
NSTALLATION AND
!3
. The programmed hook-flash is invoked on the connected CO
show show chg chg bksp bksp
show show chg chg bksp bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
3-141
M M
AINTENANCE ANUAL
®
or a PBX system. In these two cases, the Flash feature
Memo Pad
Automatic Redial
2
.
1
.
save save
save save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password
!3
/3
to generate a