¢£¤¥
•
Use
«
•
Press
until the selected UCD Group number displays (usually 24).
¢£¤¥
•
Use
•
Input the digit string for the selected call type. Then press
•
Continue until all programming is complete.
•
When all changes are made press the
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press
(escape) again to return to the Database Programming menu.
Program Voice Mail Dialing Ratio:
¢£¤¥
•
Use
¢£¤¥
•
Use
¢£¤¥
•
Use
«
•
Press
until the required time displays.
•
When all changes are made press the
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press
(escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Voice Mail – Digital Integration (optional)
The DX-80 system may be equipped with the optional DX-80 Voice – voice mail system. This voice processing
solution is fully integrated with the DX-80 system. Performance of the digitally integrated DX-80 Voice is notably
superior to that of a regular analog integration. When DX-80 Voice is added to the DX-80 system, the digital interface
has the advantage of adding up to eight ports of voice mail while maintaining a maximum system configuration of 16
CO Line ports, 48 Digital Telephone ports, and 8 Analog device ports. With DX-80 Voice there is no port loss.
The DX-80 digital integration also eases installation effort by automating setup of the three primary functions users
wish to deploy in a voice processing system; Voice Messaging, Automated Attendant, and Menu Routing. Just install
P7290 IMM
DX-80 I
NSTALLATION AND
to highlight the Tenant Group to program (usually "1"). Then press
to highlight the various call handling digit parameter to program. Then press
°
(escape) key to exit this database programming screen. You will
to highlight "Call Handling." Then press
to highlight "Category 3." Then press
to highlight VM Dialing Ratio – Tone Time or Inter-Digit Time. Then press
°
(escape) key to exit this database programming screen. You will
M
M
AINTENANCE
ANUAL
«
.
«
.
«
.
3-257
«
.
«
.
«
.
!64