Discriminating Ringing - Comdial DX-80 Installation And Maintenance Manual

•
Press the Hold button to exit DSS Allocation programming and return to the previous menu level.
•
Continue making other programming changes or exit the programming mode.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
¢£¤¥
•
Use
¢£¤¥
•
Use
¢£¤¥
•
Use
When allocating DSS Consoles, two directory numbers are required, the actual digital extension port
directory number where the DSS Console is connected ("DIR No.") and the Digital Extension Directory
Number of the extension to which this DSS Console is to be associated ("DSS Owner").
«
•
.
Press
•
Input the directory number for the selected data item. (For "DIR No." input the directory number of the port
where the DSS console is connected. For "DSS Owner" input the directory number of the extension to be
associated to this DSS Console.)
«
•
.
Press This temporarily stores this data while other changes are being made.
¢£¤¥
•
Use
•
When you have completed all changes, press the
screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.Discriminating Ringing.

Discriminating Ringing

Discriminating Ringing is provided to denote ringing patterns specific to system resources. Ringing at an extension for
intercom calls is different than ringing for CO Line calls. This difference is referred to as Discriminating Ringing.
There are 10 choices of ring schemes that can be selected.
Related Features
Transfer
P7290 IMM
DX-80 I
NSTALLATION AND
to highlight "System Resource." Then press
to highlight "DSS Allocation." Then press
to highlight the DSS to allocate (up to 12 DSS Consoles may be added to the system).
to move the cursor to the next database item and input as data as required.
M M
AINTENANCE ANUAL
«
.
«
.
«
.
°
(escape) key to exit this database programming
Intercom
3-110