Extension Feature Status Check; Extension Paging Groups - Comdial DX-80 Installation And Maintenance Manual

Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Extension Feature Status Check

The Digital Speakerphone user can quickly determine the status of all user-controlled features. This feature is useful
for the technician as well as the user since some feature conditions may not be evident if they are not programmed
on an available programmable feature button. The current status can be observed using the LCD interactive buttons.
The following features are checked with this code:
LNR = empty
SNR = No Saved Number
Memo = No Saved Number
Telephone Lock = No
Auto Hold = No
Page Receive = Yes
Busy Ring = Yes
Hotline to = NULL
Position
Tenant Group
Pickup Group
Paging Group
Operation
1. The Digital Speakerphone must be idle.
!#8
2. Press
3. The display shows the contents of LNR (Last Number Redial).
4. Use the right soft button to advance through all of the various extension features.
5. The telephone must be idle.

Extension Paging Groups

The system provides eight (8) Extension Paging Groups per Tenant Group for partitioning the system into separate
departments for page announcements.
As an Extension Paging Group member, you receive Internal Zone Pages directed to your Extension Paging Group.
Extension Paging Groups are assigned in the Database Programming.
Related Features
Extension Paging
Related Programming
Extension – Paging Group
System Application – Numbering Plan – EXT Page Group
Conditions
a) Extensions may be assigned to only one Extension Page Group
b) When Page Announcements are made, all idle extensions in the Extension Page Group dialed by the paging
extension will receive the voice announcement from that extension.
c) Busy extensions, extensions in DND and extensions that have invoked Page Deny at their extension will not
receive page announcements.
d) Extensions that are receiving page announcements are busy for other intercom calls.
P7290 IMM
DX-80 I
NSTALLATION AND
.
3-119
M M
AINTENANCE ANUAL
Day COS = 0
Eve COS = 0
Monitor COS = 5
Warning Tone = No
Drop Call Out = No
Drop Call In = No
Intrusion Active = Yes
Intrusion Accept = Yes
Intrusion Tone = Yes
ECF Operation = No
SMDR Output = Yes
ICM Mode = VC-HF
!.8