Music On Hold (Two Source) - Comdial DX-80 Installation And Maintenance Manual

•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Music On Hold (Two Source)

CO lines that are placed on Hold are connected to one of two External Music Sources. The DX-80 system provides
two sources of Music On Hold since the system may be installed in a location that serves two separate businesses
and music on hold requirements.
Alternately a "Tone" can be provided on hold as well. If neither of the two music channels is connected to a music
source, or if the music sources are not intended for the music on hold function, the Beep Tone can provide
confirmation to callers on hold that their call is still holding. The Tone is a one-second tone repeated every 4 seconds.
Related Features
Background Music
Related Programming
CO Line - MOH Source
System Application - Numbering Plan - Music Source
Operation
Whenever a CO Line is placed on hold, the programmed music source is heard.
Conditions
The music channel(s) must be connected to some music source if background music or music on hold is
necessary.
Default Settings
CO Line – MOH Source set to "MC1" (Music Channel 1) for all CO Lines.
Programming Abstract
Program the Music Channel (1 or 2) or Tone for each CO Line.
Programming via the DET (Digital Extension Terminal)
back back back back next next next next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show show show show
•
Press [ ]. The DB Item Select screen displays.
•
Input 02-740~755-06, then press [
CO Line input (CO Line 1 = 740, CO Line 16 = 755).
chg chg
chg chg
•
Press [ ] until the appropriate MOH source displays (MC1, MC2, Tone).
•
the Hold button
Press
Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing
«
.
P7290 IMM
DX-80 I
NSTALLATION AND
show show show show chg chg chg chg bksp bksp bksp bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
save save save save
]. This advances to the MOH Source programming screen for the
to return to the previous menu level or press the Volume button to return to the DB
3-186
M M
AINTENANCE ANUAL
save save save save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password