Call Forward - Extension Predefined - Comdial DX-80 Installation And Maintenance Manual

•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu.
¢£¤¥
•
Use
¢£¤¥
•
Use
¢£¤¥
•
Use
•
Press Enter to change the data item value.
•
Input the appropriate No Answer destination for this CO Line. Then press
•
Continue making other programming changes as required.
•
When you have completed all changes, press the
screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Call Forward – Extension Predefined
Extension Predefined Call Forwarding will forward calls directly to the associated directory number for the
programmed condition. Extension Predefined Call Forward affects ringing intercom calls and transferred calls. The
programmed Extension Predefined Forward is a single step only forward destination. (No secondary or tertiary steps
can be assigned.) Two destinations may be assigned based on station status, Busy and No Answer. That is, the first
step destination may be different for busy calls and calls that go unanswered.
The condition "Wrong Number Destination" is provided for routing of calls to directory numbers that are unequipped.
That is, the programmed destination is where calls will be routed when the associated directory number is dialed.
Related Features
Call Forward – Extension
Related Programming
Call Handling - CO Line Preset Call Forward
Conditions
a) Calls that are forwarded to the DX-80 Voice Mail system via any extension call forward include special
handling. The extension directory number is sent to the VM system with the call to identify the mailbox
where this call should be routed.
b) Call Forward – Extension settings (user invoked call forward) supersede Call Forward – Predefined settings.
Default Setting
Extension – Predefined FWD – Wrong # = Null for all extensions. (Range: any extension or directory
number.)
Extension – Predefined FWD – Busy = Null for all extensions. (Range: any extension or directory number.)
P7290 IMM
DX-80 I
NSTALLATION AND
to highlight "CO Line." Then press
to highlight "Answering Position." Then press
to highlight "Pre-CFW NoAns." Then press
M M
AINTENANCE ANUAL
«
.
«
.
«
.
«
°
(escape) key to exit this database programming
Call Forward – CO Line Predefined
3-50
.