Mute; Night Service Mode / Activate - Comdial DX-80 Installation And Maintenance Manual

•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
¢£¤¥
•
Use
¢£¤¥
•
Use
¢£¤¥
•
Use
«
•
.
Press Each time that enter is pressed the value of this database item is updated.
•
Continue making other programming changes as required.
•
When all changes are made press the
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Mute

Mute is provided to allow for temporary canceling of transmission to the connected party. Whenever a private
conversation is required inside the office, Mute can be invoked to prohibit the telephone-connected party from
listening in. Press the Mute button during a conversation to cancel the microphone whenever necessary.
All Digital Speakerphones have a standard mute button.
Operation
1. While connected to any call, press the Mute button. The display momentarily shows:
the Mute button
2. Press
Conditions
When Mute is active, the red Auxiliary Lamp flashes slowly.

Night Service Mode / Activate

Business situations including after-hours operation require ringing patterns to be different than they may be during
normal business operations. You can place the system into Evening Mode as one of the available Service Modes.
P7290 IMM
DX-80 I
NSTALLATION AND
to highlight "CO Line" and then press
to highlight "Category 2" and then press
to highlight the database item "MOH Source" for the CO Line to be changed.
°
(escape) key to exit this database-programming screen. You will
MUTE ACTIVE
again to cancel. The display momentarily shows:
MUTE INACTIVE
M M
AINTENANCE ANUAL
«
.
«
.
«
.
3-187
!63