Co Line Ringing Modes - Comdial DX-80 Installation And Maintenance Manual

show show show show
•
Press [ ]. The DB Item Select screen displays.
•
Input 02-740~755-11 (740~755 = the CO Line directory number).
chg chg chg chg
•
Press [ ] until the appropriate Ring Type displays.
•
Continue making other programming changes or exit the programming mode.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
¢£¤¥
•
Use
¢£¤¥
•
Use
¢£¤¥
•
Use
«
•
Press until the appropriate Ring Type displays.
¢£¤¥
•
Use
•
Repeat the programming process for all CO Lines.
•
When you have completed all changes, press the
screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

CO Line Ringing Modes

The DX-80 system has several ringing modes to allow flexible ringing patterns depending office conditions. The
ringing modes available are: DAY, EVEning, ALTernate, and TIME. The DAY and EVE modes can be programmed
for ringing assignments as required in these two operational conditions. Details for each mode are listed below.
DAY: This is the ringing pattern for CO Line ringing assignments while the system is in DAY mode.
EVE: This is the ringing pattern for CO Line ringing assignments while the system is in EVE (evening) mode.
TIME: This is a scheduled time clock that automatically adjusts the mode of system operation from DAY mode to
EVE mode based upon preprogrammed settings.
ALT: The Alternate mode is specific to use with the optional AAM (Automated Attendant Module). This mode re-
directs callers who have dialed 0 (zero) at the auto-attendant prompt to a temporary (alternate) destination.
This is typically used for primary attendant break periods, etc.
P7290 IMM
DX-80 I
NSTALLATION AND
to highlight "CO Line." Then press
to highlight "Category 2." Then press
to highlight the Ring Type for the CO Line.
to highlight the next CO Line Ring Type to be changed.
M M
AINTENANCE ANUAL
«
.
«
.
«
.
°
(escape) key to exit this database programming
3-82
!63