Automatic Record (Via Dx-80 Hard Drive Voice Mail) - Comdial DX-80 Installation And Maintenance Manual

Operation – Cancel
!*94
1. Press
2. You hear the confirmation tone and the condition is reset. The display shows:
3. The extension is returned to an idle state.
Conditions
a) The Feature Code (
To enable/disable the feature, press the flexible button.
b) If you access an idle line and skip to another line before dialing, the first line will not be automatically placed
on Hold. (A line must be connected with an active call; either you dialed a number or answered a ringing
line.)
c) The Automatic Hold feature places a call on Exclusive Hold.
d) If you have the Automatic Hold feature programmed on a feature button, the feature button lamp will light
when the feature is enabled.
Default Setting
Auto Hold Disabled

Automatic Record (via DX-80 Hard Drive Voice Mail)!

The system permits eight extensions to have the Automatic Recording capability. When this feature is enabled for an
extension, the system will record all conversations at that extension automatically whenever the user is on an
internal/external call. The record will be deleted automatically after the call is released or placed on hold unless the
user presses Voice Recorder button (
call. When saved, the conversation is stored in the extension user's mailbox.
Related Features
Voice Mail - Digital Integration
Related Programming
Extension Application - Voice Mail Table, Record Digit, and Automatic Record Member
Call Handling - Voice Mail Dialing Ratio
Operation
Note: The extension(s) assigned for Automatic Record must have a Voice Record button programmed.
(See Flexible Feature Button Programming and Voice Record
1. Whenever the Automatic Record Member digital speakerphone is engaged in a call, the Auto Record
function is initiated.
2. Prior to recording the conversation, the connection to the voice mail box must be set up. During this setup
time, the display will show "RECORDER SETUP" and the Voice Record button will be lit steady red.
3. When the connection to the voice mail box is established, the display reads "RECORDING" and the Voice
Record button LED is lit steady green.
Important: If the extension user wishes to retain the recorded conversation, he must press the Voice Record
programmed feature button prior to completing the call (hanging up).
Conditions
a) The Feature Code
speakerphone to be used with the Auto Record feature.
P7290 IMM
DX-80 I
NSTALLATION AND
.
AUTO HOLD DENY
!94
) may be programmed under a flexible button on a Digital Speakerphone.
!67
) to save the recorded conversation before ending or holding the
!67
must be programmed under a flexible feature button on the digital
M M
AINTENANCE ANUAL
!67
).
3-27
67