Volume Control - Comdial DX-80 Installation And Maintenance Manual

•
All other database items in this programming screen are ignored when the DX-80 Voice is used.
•
When changes are complete press the
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Volume Control

The DX-80 digital speakerphone is equipped with a volume control that is used to adjust the various volume settings
of the telephone. The following functions can be adjusted:
•
Background Music
•
Ringing
•
Handset
•
Speaker (Includes speakerphone and page announcement volume)
•
Headset
Adjust for each function is made while that function is in use. The digital speakerphone remembers the volume level
selected for each function the next time that function is used. The Ringer volume adjustment allows for 4 (four)
volume levels. All other modes allow for 8 (eight) volume levels.
Related Features
Transfer
Background Music
CO Line Ringing Assignment
Operation
Whenever a mode is active, press the Volume button up or down as necessary. The volume for this
mode/function is now set.
Conditions
a) You may adjust the ringing volume while the Digital Speakerphone is not in use or while it is ringing.
b) When adjusting the ring volume, the display will temporarily show the current setting.
c) When attempting to adjust the ringing volume beyond the highest or lowest setting, a single ring burst is
heard to indicate that further adjustment is not possible.
d) Volume settings affects receive loudness only. The person to whom you are speaking will not detect an
increase/decrease in volume.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
°
(escape) key to exit this database programming screen. You will
3-261
M
ANUAL
Paging
Headset Mode
Speakerphone