End-To-End Signaling/Voice Mail Dialing Ratio - Comdial DX-80 Installation And Maintenance Manual

e) An extension must be programmed for the ability to Intrude upon an extension to operate this feature. (See
Intrusion.)

End-To-End Signaling/Voice Mail Dialing Ratio

This feature allows Digital Speakerphone extensions to generate in-band DTMF tones while connected on ICM calls
to an on-site voice mail system and to ancillary devices connected to the External Page Port.
Related Features
Voice Mail
Related Programming
Extension – Port Type
System Application – Numbering Plan – External Pager
Call Handling – VM Dialing Ratio – Tone Time
Call Handling – VM Dialing Ratio – Inter Digit Time
Operation
When intercom calls are made to either an External Page Port or a Voice Mail System, digits dialed on the
dial pad are sent to the connected device as DTMF tones.
Conditions
a) DTMF digits are only generated to extension ports of Type VM.
b) DTMF tone time and inter-digit time follows the programming of VM Dialing Ratio.
Default Setting
Call Handling – VM Dialing Ratio – Tone Time = 120. (Range is 60-150.)
Call Handling – VM Dialing Ratio – Inter Digit Time = 120. (Range is 60-150.)
Programming Abstract
•
Program Extension Port as required for VM operation – reference Voice Mail – Analog Integration.
•
Program dialing ratios as required by the ancillary devices.
Programming via the DET (Digital Extension Terminal)
back back back back next next next next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show show show show
•
Press [ ]. The DB Item Select screen displays.
•
Input 03-33-01, then press [
chg chg
chg chg
•
Press [ ] until the appropriate Tone Time displays.
next next next next
•
Press [ ]. The Inter-Digit Time displays.
chg chg chg chg
•
Press [ ] until the appropriate Inter-Digit Time displays.
•
the Hold button
Press
return to the DB Item Selection screen or exit programming.
P7290 IMM
DX-80 I
NSTALLATION AND
show show show show chg chg chg chg bksp bksp bksp bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
save save save save
]. The Tone Time displays.
to return to the previous menu level or press
3-116
M M
AINTENANCE ANUAL
External Paging
save save save save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password
the Volume button (up or down)
to