Co Line Ring Assignment (Answer Position) - Comdial DX-80 Installation And Maintenance Manual

•
Continue this process for all extensions/CO Lines to change.
•
When you have completed all changes, press the
screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

CO Line Ring Assignment (Answer Position)

Ring Assignments determine the extensions and other system resources that will be designated to ring on each CO
Line. Ringing assignments may be to UCD Groups, Virtual Numbers or to Extensions. Each CO Line has six
assignments for ringing in the Day mode, one assignment for ringing in the Evening mode and one assignment for No
Answer – Predefined Call Forward.
Related Features
CO Line Signaling
Do Not Disturb
Call Forward - Station
Related Programming
System Application – Time Switching
Extension – Receive Assignment
CO Line – Answering Position
Call Handling – Predefined Forward Time
Conditions
Ringing more than six extensions is accomplished by assigning ringing to a UCD Group, then assigning the
appropriate extensions into that UCD Group and setting the UCD Group Hunting Method at All Ring.
Default Settings
All CO Lines are assigned to ring at extension 101 (default attendant position) in the Day and Evening
modes of operation.
No Predefined Call Forward destination is assigned for any CO Line (see Call Forward – CO Line
Predefined.)
Programming Abstract
•
Program CO Lines for ringing as required.
(Ringing may be assigned to extensions, Hunt Groups or to Virtual Numbers.)
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
°
(escape) key to exit this database programming
3-79
M
ANUAL
Call Forward - Predefined
Auxiliary Lamp