Features; Account Code - Voluntary / Forced / Verified - Comdial DX-80 Installation And Maintenance Manual

3. Features

The DX-80 system has a variety of features designed to provide maximum call handling efficiency and flexibility. This
section details these features, which appear alphabetically.
Account Code – Voluntary / Forced / Verified
Account Codes can be entered at any extension voluntarily to record an association of the call in progress in detailed
records output from the DX-80 system (SMDR). Alternatively, an extension may be Forced to enter an account code
to make certain LINE calls or before any LINE calls can be made. The account code length is predetermined and
programmed to be from 2 to 8 digits. When Forced to use an account code, the extension is restricted to certain call
criteria via that extension's programmed Class of Service. This initial Class of Service is bypassed by entering an
Account Code that is assigned a new Class of Service. This Class is in effect for the duration of consecutive use at
this extension. (Note: This new Class may itself have some level of restriction.) When Forced, Account Codes are
verified against those codes listed in the Account Codes Table.
Related Features
Extension Toll Restriction
SMDR (Station Message Detail Recording)
Related Programming
Restriction – Toll Restriction – Digit Intervals
Restriction – Toll Restriction – Account Codes
Extension – Day/Eve Class
System Application – Numbering Plan – Account Code
Operation
1. Dial the Account Code Directory number
2. Enter a valid account code (considering digits programmed and programmed length of account code).
3. The DX-80 system will automatically access an idle CO Line and assign the Class of Service associated to
the entered account code for use on this call.
4. Dial the appropriate telephone number. (If this number is allowed by the entered account code, the call will
be completed. Otherwise, error tone will be heard and the call will be terminated.)
Conditions
a) If you dial an invalid account code, you will hear error tone and the account code procedure will be
terminated.
b) When you dial a valid account code, the call is monitored for toll restriction against the Class of Service
associated to the entered Account Code.
Programming Abstract
•
Designate the length for account codes. This single setting determines the length of account codes for the
entire system. The account code length can be from 2 to 8 digits.
•
Assign Account Codes. Up to 600 unique account codes may be assigned. Each is given a specific Class of
Service to allow the associated dialing criteria established in that Class Of Service (see Toll Restriction).
Default Setting
Account Code length - 2 digits (Range is 2-8.)
Account Codes - None programmed (Range is any numeral 0-9, maximum of 8 digits.)
Account Code Class of Service - 0
Account Code Disabled - N
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
79
. The display will prompt you to enter a valid account code.
3-1
M
ANUAL
Auto Line Select
79