Extension User Name - Comdial DX-80 Installation And Maintenance Manual

•
Input 01-101~156-22, then press [
show show show show
•
Press [ ].
•
Input the extension directory number that is to be assigned to this port, then press [
number is now in operation on this port. The old directory number is now moved to the port where the new
number came from.
•
the Hold button
Press
Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
¢£¤¥
•
Use
¢£¤¥
•
Use
No. Swapping) displays. The cursor is positioned on the first digital extension port.
¢£¤¥
•
Use ,
«
•
.
Press
•
Input the new directory number for this extension. (Note: The directory number must be a valid Extension
Directory Number as allocated in System Applications – Numbering Plan 2.)
«
•
Press to invoke the swapping of directory numbers. If this directory number was in use at another
extension port, that port is immediately reassigned the directory number previously assigned to the port
where the swap was invoked.
•
Continue swapping extension directory numbers as required.
•
When you have completed all changes, press the
screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Extension User Name

An alphanumeric, seven-character title may be assigned to each extension in the system. This title will be displayed
on the Digital Speakerphone in place of the standard "EXT" message.
P7290 IMM
DX-80 I
NSTALLATION AND
save save save save
]. This advances to the Directory Number Swapping screen.
to return to the previous menu level or press
to highlight "Extension." Then press
to highlight "Category 4" and then press
³´
to highlight the extension port to be changed.
M M
AINTENANCE ANUAL
the Volume button
«
.
«
.
«
. The Extension – Category 4 screen (DIR
°
(escape) key to exit this database programming
3-127
save save
save save
]. The new directory
to return to the DB