Intercom Mode Selection - Comdial DX-80 Installation And Maintenance Manual

Conditions
a) Some applications may require a button to indicate use of the intercom feature at extensions. To meet this
requirement, the feature code
use.
b) Intercom calls to telephones in Voice Announce – Hands-free or Voice Announce - Private are "logically"
answered by the system at the called extension. Therefore these calls cannot be picked up by other
extensions using Group Call Pickup.
c) Auto Line Selection is set to "ICM" (Intercom) at default. So, intercom dial tone is heard automatically upon
lifting the handset or when pressing the
d) When you call an extension that is in Voice Announce mode you can change the mode to Tone Ringing by
*
after the extension number (Forced Tone Ringing).
e) If a called extension does not answer you can invoke a callback to that extension by first using Forced Tone
Ring.

Intercom Mode Selection

A Digital speakerphone has the benefit of receiving intercom calls in three ways:
•
Voice Announce Hands-free reply mode
•
Voice Announce Privacy mode
•
Tone Ringing mode
The Intercom Mode is set individually at each digital speakerphone for greater flexibility of operation.
Related Features
Call Forward
Forced Intercom Tone Ring
Off Hook Voice Announce w/Hands-free Answerback
Operation – Setup
1. While the extension is idle, press
new mode set:
!98
2. Press
Operation – Receiving a Call in VA-HF Mode
When your extension is idle, an intercom call to your extension will alert you of the call with one tone burst.
The voice connection is then immediately established and you may respond to the calling extension without
lifting the handset.
Operation – Receiving a Call in VA-Privacy Mode
1. When your extension is idle, an intercom call to your extension will alert you of the call with one tone burst.
The voice connection is then immediately established; however, the Mute function is automatically activated
at your extension. The calling extension voice announcement is heard over the speaker but the microphone
in your telephone is disabled.
P7290 IMM
DX-80 I
NSTALLATION AND
!65
can be programmed on an available Flexible Feature Button for
On/Off
!98
. You hear the confirmation tone and the display indicates the
VA-PRIVACY MODE
VA-HF MODE
TONE RING MODE
again to advance through each of the available modes.
3-168
M M
AINTENANCE ANUAL
button.
Flexible Feature Button Programming
Voice Announce
!98
– Hands-free Reply