External Paging 777 - Comdial DX-80 Installation And Maintenance Manual

•
Input the new appropriate code and then press
See Flexible Numbering Plan for rules of directory number application.
•
When you have completed all changes, press the
screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
External Paging
The system provides external one-way, dedicated paging access to a paging amplifier or multi-zone one-way page
controller. The External Paging Zone may be accessed individually or with all eight (8) Internal Paging Zones as an
All Call Page.
Related Features
Paging
Related Programming
Extension - Paging Group, Paging Allow
Operation
1. While in the idle condition – lift the handset.
2. Dial the External Page access code
3. Page Alert Tone is heard.
4. Make paging announcement.
5. Hang up when finished.
Conditions
The External Page access code may be programmed on any feature button.
Default Settings
System Application – Numbering Plan 4 – External Pager is set to "777." (Range is: any available, non-
conflicting directory number.)
Programming Abstract
Program the directory number for the External Pager.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
«
°
(escape) key to exit this database programming
777
.
3-131
M
ANUAL
to temporarily store this data.
Meet Me Page
777