Call Duration Timer; Call Forward - Extension; Warning Tone - Comdial DX-80 Installation And Maintenance Manual

Call Duration Timer

This feature is enabled in the Database Programming on a per extension basis. When enabled, any outgoing CO line
will be automatically timed and then dropped after the system "Warning Tone" time is exceeded. This feature is
normally used to control outgoing call traffic.
Related Features
SMDR
Warning Time
Related Programming
Call Handling - Call Duration Time
Conditions
The Call Timer begins after the Call Duration Time has expired.
Call Forward – Extension
There are many Extension Call Forward choices:
•
All – Forward all of your calls.
•
Busy – Forward your calls when your telephone is busy.
•
Follow Me – Forward calls at your extension to the extension where you are currently working (conference
room, associates office, etc.)
•
Follow Preset – Invoke call forward at your extension so that it can be changed from another extension.
•
No Answer – Forward your calls in no answer conditions.
•
External – Forward your calls to another location or different telephone number. (This feature must be
enabled for your extension in database administration.)
Forward conditions may be set as follows for each call forward type:
•
Intercom calls only.
•
Intercom and CO Line (including transferred CO Lines) calls.
•
CO Line calls only.
Related Features
Do Not Disturb
Message Waiting
Intercom Mode Selection
Related Programming
Extension - Receive Assignment
CO Line - Line Assignment
Call Handling - XFR_I Recall, XFR_B Recall, CO Line Preset CFW
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
3-42
M
ANUAL

Warning Tone

!2
Forced Intercom Call Forward
Forced Intercom Tone Ring