Database Administration - Via Pc-Dba - Comdial DX-80 Installation And Maintenance Manual

¢£¤¥
•
Use
Program the maximum number of CO Lines that may be in a Conference:
¢£¤¥
•
Use
displays.
¢£¤¥
•
Use
«
•
.
Press Each time that enter is pressed the value of this database item is updated.
Unsupervised Conference Time:
•
Press the Page Up or Page Down button to select the second page of Category 1. "[2/2]"
•
Use the cursor arrows to highlight "Unsupervised Talk Time."
«
•
Press until the appropriate Unsupervised Talk Time displays.
•
When you have completed all changes, press the
screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation. The main Call Handling screen is again visible.
Program the Conference Tone Operation:
¢£¤¥
•
Use
¢£¤¥
•
Use
«
•
Press until the appropriate value displays. (Y/N)
•
When you have completed all changes, press the
screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Database Administration – Via PC-DBA
The DX-80 system allows the installer/technician to administer system database parameters via an IBM
Personal Computer. The use of a PC has distinct advantages over programming the system via the digital telephone,
including: specific database archiving (via save function), remote programming, outboard programming (program the
P7290 IMM
DX-80 I
NSTALLATION AND
to highlight "Call Handling." Then press
to highlight "Category 1." Then press
to highlight the database item CO Line Conference.
to highlight "Category 3." Then press
to highlight "Conference Tone." Then press
M M
AINTENANCE ANUAL
«
.
«
. The CO Line – Category 1 "[1/2]" screen
°
(escape) key to exit this database programming
«
.
«
.
°
(escape) key to exit this database programming
3-94
®
Compatible,