Enhanced Lettering Scheme - Comdial DX-80 Installation And Maintenance Manual

Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
¢£¤¥
•
Use
¢£¤¥
•
Use
¢£¤¥
•
Use
•
Press until the appropriate time displays for the parameter.
•
Continue making other programming changes as required.
•
When you have completed all changes, press the
screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Enhanced Lettering Scheme

Extension User Names, CO Line Names, Pre-Programmed Messages, and UCD Names (programmed into the
customer database) may be enhanced for special requirements using the choices available in the Letter Schemes.
The end user may select from eight different lettering schemes that can be programmed for use at any one
installation. While these names are being entered (in database programming) and while the user is editing an
Outgoing Message, the chosen Letter Scheme characters will be accessible with successive depressions of the "1"
dial pad key. Use the following table to determine what letter scheme best suits this installation.
Related Features
Extension User Names
CO Line Names
Messaging – Call Me, Text or Voice
Related Programming
System Resource - CO Line Names
System Resource - User Name
System Resource - Messaging
Extension Application - Uniformed Call Distribution - Name
Operation
Refer to the specific Name Feature to be programmed.
P7290 IMM
DX-80 I
NSTALLATION AND
to highlight "Call Handling." Then press
to highlight "Category 3." Then press
to highlight "VM Dialing Ratio – Tone Time" or "Inter-Digit Time."
M M
AINTENANCE ANUAL
«
.
«
.
«
.
°
(escape) key to exit this database programming
UCD / Hunt Groups
Alphanumeric Display
3-117