On Hook Dialing; Page Allow / Deny; Paging - Comdial DX-80 Installation And Maintenance Manual

On Hook Dialing

Digital Speakerphone extensions may make outgoing calls without lifting the handset and monitor the dialing status
through the built-in speaker. The button lamp is lit when monitoring a call.
The Digital Speakerphones provide full hands-free speakerphone operation in addition to On-Hook Dialing.
Related Features
Automatic Line Selection
Operation
1. When Hot Key is enabled, dial any extension number while on-hook.
Or...
Press any CO Line button and dial while on-hook.
2. When Hot Key is disabled, press the On/Off button or press an idle CO Line button. Then dial while on-hook.

Page Allow / Deny

You can block one-way pages (internal, group, and all page) over the Digital telephone speaker by dialing the Page
Deny code. The Page Allow/Deny feature does not affect enabled Background Music.
Related Features

Paging

Related Programming
Extension - Paging Group
Operation – Setup
1. When the extension is idle, press
!/9
2. Press
Conditions
a) The Page Allow/Deny feature code may be stored on a feature button.
b) You will still hear intercom calls and private voice announcements.
Default Settings
Extension – Paging group = "1" for all extensions. (Range is 1-8. See Extension Page Groups.)
Page Deny/Accept is set to Accept for all digital speakerphones.
Paging
You can perform several types of page announcements:
•
Internal Paging - you can page a group or place a system-wide internal page.
•
External Paging - you can access external ancillary paging equipment.
P7290 IMM
DX-80 I
NSTALLATION AND
!/9
PAGING DENY
again to enable page announcements at your extension.
PAGING ACCEPT
3-190
M M
AINTENANCE ANUAL
Hot Key
.
!#9