Phantom Lines / Virtual Numbers - Comdial DX-80 Installation And Maintenance Manual

Program Hunt Method (Search order) for the selected CO Line Group:
•
Use the cursor positioning arrows to highlight "CO Line Application" and then press
¢£¤¥
•
Use
¢£¤¥
•
Use
«
•
Press until the appropriate search order displays
•
Continue making other programming changes as required.
•
When all changes are made press the
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Phantom Lines / Virtual Numbers

Phantom Lines are software resources that act as placement mechanisms for call processing. CO Line and intercom
calls can be routed to Phantom Line (or Virtual Number) where they can be accessed by any extension that has an
appearance (button) for that Phantom Line. In the event that internal call routing requires a connection (CO Line or
intercom) to be placed in a general access location, Phantom Lines can be the solution.
Phantom Lines do not audibly signal (ring), call indication at a Phantom Line is accomplished by fast flashing
indication on the associated LED only. Calls that are connected to Phantom Lines are usually announced using the
Page feature for proper pickup.
Related Features
Transfer
DSS/BLF
Related Programming
System Application – Numbering Plan – Virtual Numbers (see Flexible Numbering Plan).
Operation – Placing a Call Using Phantom Line
1. While idle, dial the Phantom Line number (lift the handset if you want a private conversation.)
2. The Phantom Line called will begin to fast flash at the extensions where this Phantom Line appears.
Operation – Transferring a Call to a Phantom Line
1. While connected (intercom or CO Line), press the Transfer button.
2. Dial the Phantom Line number.
3. Hang up to complete the transfer.
4. The Phantom Line called will begin to fast flash at the extensions where this Phantom Line appears.
P7290 IMM
DX-80 I
NSTALLATION AND
to highlight "Category 1" Then press
to highlight "Search Order" for the CO Line Group to be changed.
°
(escape) key to exit this database-programming screen. You will
M M
AINTENANCE ANUAL
«
.
.
700~729
Flexible Feature Buttons
3-197
«
.