Toll Restriction - Class Of Service - Comdial DX-80 Installation And Maintenance Manual

¢£¤¥
•
Use
«
•
Press until the appropriate tenant group number displays.
¢£¤¥
•
Use
above until all CO Lines are programmed in the tenant groups.
•
When all changes are made press the
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
Program Tenant Group Calling:
¢£¤¥
•
Use
¢£¤¥
•
Use
table displays. Intercom calling is allowed from one tenant group to another.
¢£¤¥
•
Use
«
•
Press until the appropriate setting displays. (Calling is allowed/denied from the Tenant Group listed on
the left to the Tenant Group listed across the top.
•
When all changes are made press the
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function has
been performed. Please refer to the Programming section of this manual to learn more about this procedure.
Toll Restriction – Class of Service
The DX-80 provides sophisticated monitoring of digits dialed on CO lines. The assignment of COS (Class Of Service)
may be used for a broader range of call control than simple "Toll Restriction" implies. If a digit or range of digits dialed
on a CO line is inconsistent with the dialing extension's COS or CO Line COS the call is denied. This calling COS
criteria can be applied to local calls, long distance calls and specific numbers that are considered allowed in areas
where other numbers may be restricted.
The DX-80 provides a Toll Restriction table of 100 entries. Each entry may contain 10 digits in the "From" column and
10 digits in the "To" column. The From and To columns exist to apply a range of digits in a truth-table fashion known
as digit Intervals. Extension COS and CO Line COS is then designated per table entry as Y/N. (E.g., does this table
entry apply to this COS? Yes or No.) Extension and CO Line COS assignments for each table entry are provided
P7290 IMM
DX-80 I
NSTALLATION AND
³´
and to highlight "Tenant Group" for the appropriate CO Line to program.
³´
and to highlight "Tenant Group" for the next CO Line to program and continue as
°
(escape) key to exit this database programming screen. You will
to highlight "Call Handling" and then press
to highlight "Tenant Calling" and then press
to highlight the "From" and "To" calling designation for the Tenant Group.
°
(escape) key to exit this database programming screen. You will
M M
AINTENANCE ANUAL
«
.
«
. The Tenant Group Calling screen and
3-228