Co Line Name / Label Programming - Comdial DX-80 Installation And Maintenance Manual

CO Line Name / Label Programming

Naming (or labeling) of CO Lines is provided to customize the appearance of the line identifier in the telephone
display when the CO Line is in use. This labeling can assist users when handling CO Line calls by orienting the line to
its intended purpose.
Default Settings
System Resource – CO Line Names; CO Lines are named "LINE 1" through "LINE 16" for CO Line directory
numbers 740-755 sequentially.
Programming Abstract
Program – CO Lines as required for customized names. (7 characters maximum)
Programming via the DET (Digital Extension Terminal)
back back back back next next next next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show show show show
•
Press [ ]. The DB Item Select screen displays.
Program CO Lines for Customized names. (Index 04-06-ccc, where "ccc" = the CO Line Directory number
[740-755]):
•
Enter 04-06-ccc to program "ccc" CO Line name/label for the display.
save save save save
•
Press [ ]. This advances to the selected CO Line Name/Label database item and shows the current
name/label programmed.
chg chg
chg chg
•
Press [ ] to input a new name/label.
•
Use the dial pad buttons and the table below to input the name/label for the CO Line. (Important: the
enter
button acts as an
character in the position.
save save
save save
•
Press [ ] to save the new name/label programming.
next next next next
•
Press [ ] to enter another CO Line directory number for programming.
•
When finished programming CO Line Name/Labels, press
DB Item Select screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
¢£¤¥
•
Use
¢£¤¥
•
Use
is listed along the left side of the display. The current name/label programmed is listed adjacent to each
directory number.
P7290 IMM
DX-80 I
NSTALLATION AND
show show show show chg chg chg chg bksp bksp bksp bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
key. It must be pressed after each character is input to temporarily store that
+
is also used to enter a space.)
to highlight "System Resource." Then press
to highlight "CO Line Names." Then press
M M
AINTENANCE ANUAL
save save save save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password
the Volume button
«
.
«
.
«
. The CO Line directory number (740-755)
3-73
+
(up or down) to return to the