Wago Components - Genie Z-45/25 Service Manual

First Edition • Second Printing
10-2
Toggle Switches
See 1-5, Toggle Switches .
Part No. 52709
10-3
Wago
1 Label the wiring from the component to be
removed.
2 Use a small screwdriver to push in and release
the wire from the component.
3 Locate the removal tab on the bottom or top
of the component.
4 Use a small screwdriver to gently pry up on the
tab of the component and remove it.
Genie Z-45/25 & Genie Z-45/25J
Section 7 • Repair Procedures
GROUND CONTROLS
®
Components
Electrocution hazard. Contact with
electrically charged circuits could
result in death or serious injury.
Remove all rings, watches and
other jewelry.
®
Wago tools are available from
the Genie Service Parts
Department (Genie part number
33996).
7 - 49