Section 4 • Scheduled Maintenance Procedures
TABLE B PROCEDURES
4 Remove the end cap from the air cleaner
canister.
5 Remove the air filter retaining fastener. Remove
the filter element.
6 Clean the inside of the canister and the gasket
with a damp cloth.
7 Install the new air filter element and install the
mounting fastener.
8 Install the end cap onto the canister. Install and
tighten the retaining ring.
9 Swing the engine back to its original position
and close the engine pivot plate latch.
10 Install the engine pivot plate safety pin
(if equipped).
Air filters - Genie part numbers
All Models
4 - 54
27916
Genie Z-45/25 & Genie Z-45/25J
First Edition • Second Printing
Part No. 52709