Genie Z-45/25 Service Manual page 2

Introduction
Important
Read, understand and obey the safety rules and
operating instructions in the
Genie Z-45/25 & Genie Z-45/25J Operator's
Manual before attempting any maintenance or
repair procedure.
This service manual covers the Genie Z-45/25 &
Genie Z-45/25J 2WD and 4WD models introduced
in 1998.
This manual provides detailed scheduled
maintenance information for the machine owner
and user. It also provides troubleshooting and
repair procedures for qualified service
professionals.
Basic mechanical, hydraulic and electrical skills
are required to perform most procedures.
However, several procedures require specialized
skills, tools, lifting equipment and a suitable
workshop. In these instances, we strongly
recommend that maintenance and repair be
performed at a Genie dealer service center.
Genie Industries has endeavored to deliver the
highest degree of accuracy possible. However,
continuous improvement of our products is a Genie
policy. Therefore product specifications are subject
to change without notice.
Readers are encouraged to notify Genie of errors
and send in suggestions for improvement. All
communications will be carefully considered for
future printings of this and other manuals. Please
write to the technical publications team in care of
Genie Industries, PO Box 97030, Redmond WA
98073-9730 U.S.A.
If you have any questions, please call Genie
Industries.
ii
Contact us:
http://www.genielift.com
e-mail: techpub@genieind.com
Genie Z-45/25 & Genie Z-45/25J
First Edition • Second Printing
®
Copyright © 1998 by Genie Industries
First Edition: Second Printing, September 2000
"Genie" and "Z" are Registered Trademarks
of Genie Industries in the USA and many other
countries.
These machines comply with
ANSI/SIA 92.5-1992.
Printed on recycled paper
Printed in U.S.A.
Part No. 52709