Genie Z-45/25 Service Manual page 429

First Edition • Second Printing
How to Remove the Turntable
Rotation Brake
1 Secure the turntable from rotating with the
turntable rotation lock pin.
Unlocked position
Locked position
2 Open the engine pivot plate latch and swing the
engine out and away from the machine to
access the turntable rotation motor and brake.
Part No. 52709
3 Tag, disconnect and plug the hydraulic hoses
from the turntable rotation motor manifold and
the brake. Cap the fittings on the manifold and
the brake.
4 Remove the turntable rotation motor mounting
fasteners, then remove the motor from the
brake.
5 Remove the turntable rotation motor from the
machine.
6 Remove the brake mounting bolts, and then
remove the turntable rotation brake from the
machine.
Genie Z-45/25 & Genie Z-45/25J
Section 7 • Repair Procedures
TURNTABLE ROTATION COMPONENTS
Bodily injury hazard.
Spraying hydraulic oil can
penetrate and burn skin. Loosen
hydraulic connections very slowly
to allow the oil pressure to
dissipate gradually. Do not
allow oil to squirt or spray.
7 - 81