Tie Rod - Genie Z-45/25 Service Manual

First Edition • Second Printing
2 Remove the cotter pin from the rod-end clevis
pin of the steer cylinder. Remove the clevis pin.
3 Remove the cotter pin from the barrel-end
clevis pin of the steer cylinder then remove the
clevis pin.
Always use a new cotter pin when
installing a clevis pin.
4 Remove the steering cylinder from the machine.
Part No. 52709
15-3

Tie Rod

How to Remove the Tie Rod
1 Remove the cotter pins from the clevis pins at
each end of the tie rod, then remove the clevis
pins.
2 Remove the tie rod.
Genie Z-45/25 & Genie Z-45/25J
Section 7 • Repair Procedures
2WD STEERING AXLE COMPONENTS
Always use a new cotter pin when
installing a clevis pin.
7 - 85