Genie Z-45/25 Service Manual page 399

First Edition • Second Printing
How to Clear Engine Fault Codes
from the ECM
Perform this procedure with the
engine off and the key switch in
the
OFF
1 Open the engine side turntable cover and locate
the battery.
2 Disconnect the negative battery cable from the
battery for a minimum of 5 minutes.
Electrocution hazard. Contact with
electrically charged circuits could
cause death or serious injury.
Remove all rings, watches and
other jewelry.
3 Connect the negative battery cable to the
battery.
Part No. 52709
position.
Genie Z-45/25 & Genie Z-45/25J
Section 7 • Repair Procedures
GROUND CONTROLS
7 - 51