Bypass Tray Feed Solenoid / Bypass Tray Feed Gear - Xerox Phaser 6600 Service Manual

Service Parts Disassembly

Bypass Tray Feed Solenoid / Bypass Tray Feed Gear

PL13.2.9 / PL13.2.8
1. Remove the Bypass Tray Frame Assembly. (page 4-65)
2. Remove the Feed Spring (PL13.2.7).
3. Release the hook holding the Bypass Tray Feed Gear and remove the gear from the Bypass Tray
Feed Shaft (PL13.2.14).
4. Remove the screw (silver, tapping, 8mm) that attaches the Bypass Tray Harness Guide (PL13.2.6),
and then move the Bypass Tray Harness Guide sideways together with Bypass Tray Sensor
(PL13.2.4).
5. Unplug connector P/J214 on the harness coming from the Bypass Tray Feed Solenoid.
6. Remove the screw (silver, tapping, 8mm) that attaches the Bypass Tray Feed Solenoid to the
printer and remove the solenoid.
4-70 Phaser 6600 and WorkCentre 6605Xerox Internal Use Only
Service Manual
P/J214
s6600-132