NEC Univerge SV8100 Features And Specifications Manual page 1022

Issue 1.0
System Availability
Terminals
All Multiline Terminals and Single Line Telephones
Required Component(s)
None
Related Features
None
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-15-12 Service Code Setup,
Administrative (for Special
Access – Extension Data Swap
20-13-42 Class of Service Options
(Supplementary Service) –
Extension Data Swap Enabling
92-05-01 Extension Data Swap Password –
Password
The following programs are swapped when Station Relocation is used:
Program 11-02 Extension Numbering
Program 12-05 Night Mode Group Assignment for Extensions
Program 13-03 Speed Dialing Group Assignment for Extensions
2 - 998
Description/Comments
Ext. Data Swap = xxx (service
code in accordance with Program
11-01).
Turns Off or On an extensions
ability to use the Station Relocation
feature.
Fixed 4-Digits.
UNIVERGE SV8100
Assigned Data
MLT
(default not assigned)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Fixed four digits (No
setting at default)
(default not assigned)
Station Relocation
Level
1 2 3