Summit X250e-48p Switch
The front panel of the Summit X250e-48p switch
Forty-eight fixed autosensing 10/100BASE-T PoE ports (ports 1–48). In addition to 4.8 Gbps of
●
high-density copper connectivity, these ports provide a full 15.4 Watts of PoE per port when used
with the EPS-600LS External Power Module.
Two combination ports (ports 49–50) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
●
or fiber connectivity
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
LEDs to indicate port status and switch operating conditions.
●
For a description of the LEDs and their operation, see
page
33.
Stack number indicator showing the position of this switch in a stacked configuration.
●
Serial console port used to connect a terminal and perform local management.
●
Figure 21: Summit X250e-48p Switch Front Panel
Stack number indicator
The rear panel of the Summit X250e-48p switch
Management port with associated LEDs
●
Two high-performance stacking ports with associated LEDs
●
Redundant power input connector for use with one or more EPS-600LS External Power Modules
●
(Model No. 10913) installed in an EPS-C chassis (Model No. 10912).
The PoE capability of the Summit X250e-48p switch varies depending on the number of external
power modules in use. For more information, see
The connecting redundant power supply cable is shipped with the EPS-C chassis.
AC power input socket.
●
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 22: Summit X250e-48p Switch Rear Panel
External power
Management port
supply connection
10 Gigabit
stacking ports
Summit Family Switches Hardware Installation Guide
(Figure
21) includes:
10/100 Mbps ports
(Figure
22) includes:
"EPS-600LS External Power Module" on page
Power socket
Summit X250e Series Switches
"Summit X250e Series Switch LEDs" on
Console
port
Combination ports
SH_042B
SH_043
58.
31