Summit Family Switches
Summit X250e-48p Switch
The front panel of the Summit X250e-48p switch
Forty-eight fixed autosensing 10/100BASE-T PoE ports (ports 1–48). In addition to 4.8 Gbps of
●
high-density copper connectivity, these ports provide a full 15.4 Watts of PoE per port when used
with the EPS-600LS External Power Module.
Two combination ports (ports 49–50) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
●
or fiber connectivity
For more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page
40.
Stack number indicator showing the position of this switch in a stacked configuration
●
Serial console port used to connect a terminal and perform local management
●
Figure 21: Summit X250e-48p Switch Front Panel
Stack number indicator
The rear panel of the Summit X250e-48p switch
Ethernet management port with associated LEDs
●
Two high-performance stacking ports with associated LEDs
●
Redundant power input connector for use with one or more EPS-600LS External Power Modules
●
(Model No. 10913) installed in an EPS-C chassis (Model No. 10912)
The connecting redundant power supply cable is shipped with the EPS-C chassis.The PoE capability
of the Summit X250e-48p switch varies depending on the number of external power modules in use.
For more information, see
AC power input socket
●
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 22: Summit X250e-48p Switch Rear Panel
External power
Management port
supply connection
10 Gigabit
stacking ports
38
(Figure
10/100 Mbps ports
(Figure
"EPS-600LS External Power Module" on page
Power socket
21) includes:
"Combination Ports and Failover" on page
"Summit X250e Series Switch LEDs" on
Console
port
Combination ports
SH_042B
22) includes:
96.
Summit Family Switches Hardware Installation Guide
21.