Summit X250E-24X Switch - Extreme Networks Summit X450a-24tDC Hardware Installation Manual

Summit Family Switches
The rear panel of the Summit X250e-24p switch
Management port with associated LEDs
●
Two high-performance stacking ports with associated LEDs
●
Redundant power input connector for use with the EPS-500 External Power Supply (Model No.
●
10911) with full PoE power support.
See "EPS-500 External Power Supply Unit" on page 57
redundant power supply cable is shipped with the EPS-500 unit.
AC power input socket.
●
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 12: Summit X250e-24p Switch Rear Panel
Management port
10 Gigabit
stacking ports

Summit X250e-24x Switch

The front panel of the Summit X250e-24x switch
Twenty-four 100BASE-FX ports (ports 1–24) that provide 2.4 Gbps of high-density fiber connectivity
●
Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
●
or fiber connectivity
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
LEDs to indicate port status and switch operating conditions.
●
For a description of the LEDs and their operation, see
page 33.
Stack number indicator showing the position of this switch in a stacked configuration.
●
Serial console port used to connect a terminal and perform local management.
●
Figure 13: Summit X250e-24x Switch Front Panel
26
External power
supply connection
Power socket
Stack number
indicator 100BASE-X ports
(Figure 12) includes:
for more information. The connecting
(Figure 7) includes:
"Summit X250e Series Switch LEDs" on
Combination ports
Summit Family Switches Hardware Installation Guide
SH_041
Console
port
SH_056A