The rear panel of the Summit X250e-24p switch
Management port with associated LEDs
●
Two high-performance stacking ports with associated LEDs
●
Redundant power input connector for use with the EPS-500 External Power Supply (Model No.
●
10911) with full PoE power support.
See
"EPS-500 External Power Supply Unit" on page 65
redundant power supply cable is shipped with the EPS-500 unit.
AC power input socket.
●
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 12: Summit X250e-24p Switch Rear Panel
External power
Management port
supply connection
10 Gigabit
stacking ports
Summit X250e-24x Switch
The front panel of the Summit X250e-24x switch
Twenty-four 100BASE-FX ports (ports 1–24) that provide 2.4 Gbps of high-density fiber connectivity
●
Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
●
or fiber connectivity
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
LEDs to indicate port status and switch operating conditions.
●
For a description of the LEDs and their operation, see
page
34.
Stack number indicator showing the position of this switch in a stacked configuration.
●
Serial console port used to connect a terminal and perform local management.
●
Figure 13: Summit X250e-24x Switch Front Panel
Stack number
indicator
ExtremeXOS Summit Family Switches Hardware Installation Guide
(Figure
12) includes:
for more information. The connecting
Power socket
(Figure
7) includes:
"Summit X250e Series Switch LEDs" on
100BASE-X ports
SH_041
Combination ports
Console
port
SH_056A
27