Clearing Paper Jams; Affecting Print Quality; Moving The Printer - Tektronix Phaser 340 Service Manual

Color printer
Hide thumbs Also See for Phaser 340:
Table of Contents

Advertisement

Clearing paper jams

Affecting print quality

Moving the printer

Media jam locations: Show the four possible locations for media jams: inside
the exit cover, inside the front cover, at the manual feed slot, at the media tray.
Show the location of the jam-clearing information in the user manual.
Increasing RAM memory: Explain that 600 x 300 dpi paper printing is only
available with a 16-Mbyte memory upgrade and that transparencies are printed
using the 300 dpi mode.
Printing transparencies using a paper tray: The printer tries to make the print
the customer requests. If paper is loaded in the printer, and the customer
requests, via the print driver, a transparency, then the printer indicates that
transparency film must be loaded and waits for the customer to do so.
Show where this is explained in the user manual and where to find the
Tektronix order number for the transparency tray.
Using TekColor color corrections: Explain that different color correction modes
are available and where to find more information in the user manual.
Transit restraint: Explain the importance of powering down the printer using
the power switch and locking the transit restraint before moving or shipping the
printer. Failure to properly lock the print head can result in serious damage to
the printer.
Show where this is explained in the user manual.
Don't tilt the printer with the maintenance tray installed inside.
Emphasize that the maintenance tray must be removed from the
printer and transported separately in a sealed plastic bag. The oil in
the maintenance tray can be messy if the tray is tipped or left tilted.
Allow the inks in the printhead to solidify (about 20 minutes) before
moving or tilting the printer.
Key Operator Training
Service Manual
4-5
4

Advertisement

Table of Contents
loading

Table of Contents