Updating The Standard Microsoft Windows Postscript Driver - Tektronix Phaser 340 Service Manual

2
Installing the Printer and Drivers

Updating the standard Microsoft Windows PostScript driver

2-28 Phaser 340 Color Printer
10. In the Options dialog box, choose the Printer Features button to see
the Tektronix Printer Features dialog box. Make color correction and
media type selections as desired. Choose the OK button to return to
the Options dialog box.
11.
Choose the OK button to return to the dialog box that lists your
printer's name across the top.
12. Choose the OK button to return to the Printers dialog box.
13. Choose the Close button.
If a customer prefers to use the standard Microsoft Windows PostScript printer
driver instead of the Tektronix driver for Windows, follow these instructions.
This update procedure provides printer page size information for applications
within Windows using the standard driver. However, color adjustments and
other PostScript Level 2 features are available only with the Tektronix
Windows 3.1 driver and are not supported by the standard driver.
These instructions assume a basic familiarity with Windows operation and
terminology. For additional information about Windows, refer to your
Microsoft Windows documentation.
Update procedure
1. Start Windows.
2. Open the Control Panel.
3.
Double–click on the Printers icon.
4. Choose the Add>> button; a list of printers is displayed.
Highlight the Tektronix printer you want to use.
5. Select Install Unlisted or Updated Printer.
6. Choose the Install button.
Note Printers using the Tektronix driver for Windows have (TekColor)
listed in their name. Printers without this designation are using the
standard Microsoft Windows PostScript driver and the WPD file.
7.
When prompted, insert the Tektronix–provided Windows 3.1 Printer
Driver diskette into your computer's disk drive. Choose your printer
without (TekColor) after the name, then click the OK button. When
asked to insert a diskette with the updated PSCRIPT.DRV file, enter
system as the location so that the current PSCRIPT.DRV file is used.