8
Field Replaceable Unit Disassembly/Assembly
Rollers
Exit roller
8-44
Phaser 340 Color Printer
Tools required
Magnetic screwdriver
T-15 TORX tip
1.
Turn off the printer and remove the power cord.
2.
Remove the right-side and left-side covers as explained in the earlier
topic, "Cabinet panels and covers" on page 8-4.
3.
Unclip the stripper cover.
4.
Disconnect the cables from I/O board 3 and then remove it.
5.
Remove the right E-ring securing the exit gear assembly and then
remove the exit gear assembly.
T-20 TORX tip