Advertisement
Quick Links
Adding extended features to a Phaser
Upgrade Kit Z340FX
This kit provides the 16-Mbyte RAM SIMM and print engine ROM necessary to provide additional
on-board fonts and imaging capabilities to a Phaser 340 Color Printer. This kit also includes diskettes
containing PostScript screen fonts; these allow you to use the additional on-board fonts available in the
Phaser 340 Plus. The PostScript Code ROM SIMM and engine ROM replaced by this upgrade kit must be
returned to Tektronix; otherwise, you will be invoiced for the unreturned ROM SIMM. Instructions for
returning the ROM SIMM are provided at the end of this instruction sheet.
Printer serial-numbered up to and including BBxxxxx require Z340FX Option 01 which includes a
PostScript ROM SIMM upgrade. Printers serial-numbered BCxxxx and above require the Z340FX Option
02 Upgrade Kit. Make sure you have the correct kit by checking your printer's serial number and the
labeling on this kit's box.
Kit contents
On-site installation
©
Copyright
1996
by Tektronix, Inc.. All rights reserved.
Print engine ROM
16-Mbyte RAM SIMM
Additional Adobe PostScript fonts (on diskette)
Anti-static wrist strap
ROM puller tool
PostScript Code ROM SIMM -- Option 01 only
User and driver manuals, disks and CD-ROM -- Z340FX Option 01
only
Return shipping packaging and label (for the ROMs)
Professional, on-site installation is just a phone call away. Productivity is
important to your business success – so when you need it done right – the first
time – call Tektronix. Tektronix' on-site installation delivers what you've been
looking for: expert service technicians who provide quality, on-site product
installation. In the United States and Canada, call 1 800-835-6100.
Don't install this upgrade, if you are not comfortable modifying electronic
equipment.
Instruction Sheet
Phaser® 340
®
340 —
063-2375-AA
Advertisement
Related Manuals for Tektronix Z340FX
Summary of Contents for Tektronix Z340FX
-
Page 1: Kit Contents
Phaser 340 Plus. The PostScript Code ROM SIMM and engine ROM replaced by this upgrade kit must be returned to Tektronix; otherwise, you will be invoiced for the unreturned ROM SIMM. Instructions for returning the ROM SIMM are provided at the end of this instruction sheet. -
Page 2: Static Electricity Precautions
Adding extended features to a Phaser® 340 — Upgrade Kit Z340FX Important! About the printer’s IP address (Z340FX Option 1 only) Upgrading the printer’s PostScript ROM will erase the printer’s IP address from the printer’s non-volatile memory. Therefore you should print the printer’s configuration page, which lists the printer’s IP address, before upgrading the printer. - Page 3 Adding extended features to a Phaser® 340 — Upgrade Kit Z340FX Slide out the main board. NV RAM chip rv ic ra ll D is rv ic e t® e rn E th Printer ID a rt chip Main board 9100-63...
- Page 4 Adding extended features to a Phaser® 340 — Upgrade Kit Z340FX Installing the PostScript Code ROM SIMM (Z340FX Option 1 only) The PostScript Code ROM SIMM is only included as a part of the upgrade if you have a printer serial-numbered BBxxxx or below. Otherwise, proceed to Step 6. Remove the currently installed PostScript code ROM SIMM from image processor board (connector P71) by spreading apart the hook-like metal pawls securing each end of the SIMM in its connector.
- Page 5 Adding extended features to a Phaser® 340 — Upgrade Kit Z340FX Installing the 16-Mbyte SIMM If a 4-Mbyte RAM SIMM is already installed in the RAM SIMM connector J20, it must be removed. You can identify a 4-Mbyte RAM SIMM by the part number 671-1561-01 or 671-3574-00 printer on its underside.
- Page 6 Adding extended features to a Phaser® 340 — Upgrade Kit Z340FX Replacing the print engine ROM Locate the print engine ROM. Note Some products may use a standard ROM IC chip while others may use an adaptor circuit board. Either part type can be substituted for the other on this main board.
-
Page 7: Setting The Printer's Ip Address
Outside the U.S.A.: Affix the special international shipping return label, included with this update kit, to conceal the original U.S. shipping label. Write the printer’s serial number on the shipping return label. Tape the box closed and ship the box to Tektronix.