Cool Down Mode (Version 2 Printers); Printing Test Prints; Printing Service Test Prints - Tektronix Phaser 340 Service Manual

9
Checks and Adjustments

Cool down mode (Version 2 printers)

Printing test prints

Printing service test prints

9-6 Phaser 340 Color Printer
3. Release buttons 1 and 2.
Printers serial-numbered BCxxxxx and up have a menu item that accelerates the
cooling down of the printhead.
1. Enter the extended menu by pressing Menu and Exit .
2.
Scroll to the Service Suppor t menu item and press Menu.
3. Scroll to the item Cool-down for Power Off and press OK .
The printer turn off all the engine heaters and runs the fans on high until the ink
in the printhead has solidified. Then the printers informs you the printer can be
turned off.
1. Turn on the printer.
2.
Allow the printer to complete its power-up self-tests. The front panel
displays:
Ready
Clean
3. Pressing the Menu and Exit buttons together to access the extended
menu. At this level you can access all the main menu items.
4. Scroll to the main menu item Service Support and then press the
Menu and Exit buttons together.
5. Scroll to the menu item Test Prints and press the Menu button to
access it list of test prints.
6.
Scroll to the desired test print and press the Print button.
Refer to Appendix B Test Patterns ; it discusses each test print and what printing
defect it reveals.
Menu