8
Field Replaceable Unit Disassembly/Assembly
8-38
Phaser 340 Color Printer
6.
Carefully plug the printhead's reservoir chamber holes with the
silicone plugs. The plugs keep liquid ink from spilling if you should
inadvertently tip the printhead.
Figure 8-22 Plugging the reservoir holes
7.
Manually unlatch the tilt cam solenoid and rotate the process motor to
tilt the printhead back to its maximum tilt-back position.
Also, make sure that cap/wipe/purge assembly is in its home
position (full down). Rotate the cap/wipe/purge drive gear to force
the cap/wipe/purge assembly to its lowest position.
Silicone
reservoir
plugs
9100-93